gtag('config', 'UA-167590875-1');

Make Money Chasing Hail

Make Money Chasing Hail: hail repair business is the
best business to start in 2020. It’s a known fact that hail causes approximately 1 billion dollars annually in the United States alone to houses commercial buildings, cars, crops and literally  everything in its path. We will now look at this awesome insurance claim specialist roofing business opportunity,

Make Money Chasing Hail Storms

Make Money Roofing As An Occupation

Best business to start in 2020: An Awesome way that I’ve found to Make Money Chasing Hail is a hail repair business. Details below.  You can help people restore  their storm damage properties at no cost to them except for their already agreed upon, insurance deductible. Overlapping in an ascending manner up and along rooftops.

Roofing and shingles is a particular occupation that specializes in roof repair and coverings. This job entails making sure that roofs are attractive as well as providing protection from the elements and increment weather. The particular conditions wherein these specialized tradesmen and women perform roofing.  Further, learning roofing and shingles, like the trade work of electricians and plumbers, requires particular knowledge and skills that must be conducted and completed correctly. Otherwise the roofs could pose a hazard to those living in the house. Patching up holes and cracked wood before appropriately covering the roof securely with shingle tiles is one example of this.

Materials used for roofing and shingles vary, but everything used is sturdy and safe architecturally and health-wise. Shingles used to be made of wood, but due to growing fire and structural hazard concerns. This material is rarely or seldom considered; instead, bitumen-soaked paper covered with aggregate (asphalt).

There’s a tremendous amount of money you can make when it hails: Make Money Chasing Hail. You can easily make six figures annually while helping other people repair storm damage properties.

Roofing and shingles also used standard appending.

Shingles are tacked or nailed on securely. But only where the shingle tile meets the roof; shingle tiles are never tacked or nailed at the overlap. Such a procedure would be deemed less secure (as it is more difficult to nail through multiple asphalt shingle tiles), and the appearance looks awkward. For ceramic (and occasionally with the asphalt), a heavy-bonding tar or paste is sometimes used to attach the roofing tiles. The shingle tiles are laid in a row along the bottom edge of the roof. Each ascending row, as said, overlaps the one beneath it by about half a length of the tile.

Roofing slates, also call “slate shingles,” are also used in roofing and shingles, and are applied the same way. Because of the heavy consistency of slate, it’s unlikely that nails or tacks are used. Instead, many roofers find pasting or tarring seems the better choice for a bonding method.

You can make six figures every year, year after year by becoming an insurance claim specialist contractor.  Insurance claim specialist roofing; siding and gutters. Plus, you will learn how to get insurance companies to pay you 20% above the final contract price.

Roofing and shingles is a meticulous and time-consuming process. This process must be carefully rendered for a roof to acquire that architectural appeal. Not only should know-how be necessary, but careful movement and stepping are a definite requirement as well.

A Certified Roofing Contractor May Just Be Your Best Choice

Because the life expectancy of your roof depends on several factors; type of roofing, quality of material, and exposure to harsh weather elements among the top. With regular maintenance and normal weathering factors, a roof can last anywhere from 10 – 100 years.

Common roofing material such as built up roofing usually lasts 12 – 20 years, metal roofing 15 – 40 years, wood shake or shingles 10 – 40 years, asphalt shingles 15 – 30 years, and specialty material like slate up to 100 years under good conditions.

Leaks start as small cracks in roofing material that may not be visible; water may collect in an adjacent area. To detect such damage, a close inspection of the roof may be necessary.

Personal injury to the homeowner caused by trying to inspect it his or her self will be avoided. A roof inspection should be performed annually. Because of constant weathering by sun, heat, rain, snow, hail, wind, and cold can cause roofing material to break down. A certified roofing contractor will know what to look for.

Selecting a Qualified Roofing Contractor

A certified, experienced contractor offers various services. From completely tearing off an old roof and replacing it with a new one, to inspecting and “certifying” an existing roof. And “guaranteed” to function properly for a certain period of time; usually 2 years. The contractor takes responsibility for any necessary roofing repair during that period.

What liability insurance coverage they carry, and whether it is up to date.  Also ask if they are a member of any regional or national trade organizations.

Several resources are available to find a certified roofing contractor. You should get referrals. Your local government licensing agencies.

Visit the GR General Contractors in the USA and In Canada, visit www.handycanadian.com for a listing of certified roofing contractors in your area.

If you’re handy and want to tackle the project yourself here are some tips:

Make Money Chasing Hail: How To Remove & Replace a Shingle Roof

This blog will show you how to remove and replace a shingle roof. But first you need to decide on the type of shingles you want to install on your roofing project.

When determining the amount of materials needed:
A square is defined by a 10 foot by 10-foot area and it takes 3 bundles of shingles per square for each square for 3-tab roofs.

There are 3-tab shingles, architectural and wood shake shingle roofs. Follow the same tips for removing all shingles.

Removing The Old Shingles

There are several tools you can use for removing the old shingles. If you are removing shingles from a roof that has multiple layers of shingles on it you may want to purchase a pitchfork. Pitchforks come in handy and are very useful for removing multiples layers of shingles due to there being a lot more nails from the additional layers of shingles. You can buy them at your local hardware stores, Lowes or Home depot. However, using pitchforks leave a lot of nails sticking up that you will have to deal with later.

There are other tools you can use for removing the old shingles like flat spades and there’s even one called a shingle eater. Shingle eaters work very well when removing shingles from roofs that only have 1 to 2 layers of shingle installed on them. Shingle eaters work well because the bottom edge is not smooth. There are v cutouts on the bottom edge approximately 1 inch apart.  Allowing you to easily pop stubborn shingles off .

Make Money Chasing Hail: Roof Decking

Be sure to remove the roofing felt so you can inspect the roof decking for rot or decay. You will need to replace all bad wood before you begin installing the new roof. You will also want to either pull all of the nails or, hammer all of the ones in that are not flush to the roof decking. Learn how to earn six figures annually and start Making  Money Chasing Hail.

Make Money Chasing Hail: Here’s a guide you can follow If you are installing a 3-tab shingle roof:

You will need a tape measure preferably a 25-foot tape measure.  A chalk line to mark the roof off to keep the shingle straight, and a metal cutter such as tin snips or metal masters for installing the drip edge.

You need to sweep the roof off to ensure that there won’t be anything that will create a lump or bulge. This ensures a clean smooth surface when installing the new shingles.

Once you’ve completed the above steps and you’re ready to install the roof you will start by installing the drip edge.

Installing Drip Edge

The proper way to install drip edge is to install it on the entire perimeter of the roof. You can then install the roofing felt.

Installing Felt Underlayment

Felt comes in 15- or 30-pound rolls. You can use 15lb felt on roofs that are 4/12 pitches or greater unless it’s a mansard or low pitch roof then you would want to use 30lb felt or ice and water shield on low pitch roofs.

Roll out the roofing felt horizontally across the bottoms leaving about 1/4th space of the drip edge exposed.

Mechanical Fasteners

There are different types of fasteners you can use for installing roofing felt. My preference is 1-inch plastic caps but you can also use a stapler.

I would only use a stapler on a roof that is 4/12 pitch or less because when it’s hot outside walking on the felt is not as secure as it would be using plastic caps.

Marking the Roof For Shingle Installation

After installing the felt underlayment, measure 11 inches from the bottom on both ends of the roof slope and, pop a horizontal chalk line all the way across from end to end.

Then you need to place an upside-down shingle all the way across the bottom of the roof and place the first roll of shingles right side up, starting with a 30 inch shingle.

Then, measure 5 inches from the top of the shingle that you just installed on both ends of the roof slope. From the 5-inch line repeat the process every 5 inches until you reach the ridge.

Marking Vertical Caulk Lines

Then, pop another chalk line vertically 11 inches on both ends of the roof slope and nail a shingle with the water grooves facing inside the roof to create a smooth 1-inch edge everywhere there will be an overhang. When you complete this process, you should have a 1-inch overhang all the way around the perimeter, repeat these steps for each roof slope.

After you’ve completed these steps you need to pop 2 more vertical lines from the roof’s edges. You need to measure 29 and 35 inches from the outside edge of the drip edge. Then at the top and the bottom of the roof slope for gable roofs.

This is important in giving a perfectly straight beautiful looking roof. However, if you are going to be roofing a hip roof you have to measure and install hip roofs differently. You have to mark off hip roofs by measuring half way across the bottom of the triangle and mark 3- 4-5 or 6-8-10 feet then pop 2 vertical chalk line up and down 6 inches apart to make hip roof straight.

But This Post Is About.

Making Money Chasing Hail & Roofing As An Occupation

Learn more about Chasing Hail Storms For Big Profits.

Check out if you want to make money online. “Big Ticket Commissions”.

 

You May Also Like